Are you doing your own plumbing for the first time? You probably don’t even know where to start. It’s no secret that doing your own plumbing for the first time can be a bit overwhelming. Below are some tips that can help to make maintaining your own plumbing a bit smoother.
You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.
It is important to know how to properly anchor your pipes when it comes to plumbing. This is extremely important to know because not having your pipes well anchored could result in loud noises, leaks, or pressure problems. Call a professional if you are unsure how to take care of it yourself.
In order to keep your garbage disposal in optimal working condition, run it on a regular basis. Just a simple 60 seconds per day under cold water can keep it running clean and smooth. If not run regularly, your disposal can be susceptible to corrosion that will eventually make it inoperable.
Make sure you get a good recommendation or check the references before you hire a plumber. With good recommendations, it will assure that you are hiring an experienced plumber. If the experienced plumber is professional, he will have a fully stocked truck and be able to complete most small jobs in one visit.
Get a good quality replacement shower head. Some people think it’s alright to get the cheapest head for your shower in the store. The problem with this is that they are not very sturdy and can break much easier.
Never pour grease down the kitchen-sink drain. This will help you avoid clogs in your kitchen sink. Place grease in a can or other receptacles and dispose of in the trash. Grease that has congealed on pots, and pans can be wiped off with paper towels that can be thrown in the trash.
Clean the aerator to adjust water pressure issues which result from sediment build up. First, you should remove and disassemble the aerator. Next, clean it with a brush that has been dipped in white vinegar. After cleaning it, put the aerator back together and put it back on the faucet. Once the aerator has been cleared, your water pressure should improve.
If the pipes have burst in an upstairs area, use a tool to perforate the ceiling underneath in several places and places pots and pans under to catch the water. If this is not done, the weight of the accumulating water could cause a collapse of the entire ceiling.
Plumbing should only be done by professionals if there is a major problem or if you do not understand md sewer plumbing. Many of the big problems that plumbers deal with, actually have simple solutions. The average person, who does not understand the intricacies of plumbing, usually end up compounding the problem by causing other costly damage to the house during the failed repair. The plumber will need to be called in the end, anyway.
Make sure your plumbing contractor has the proper insurance before letting them work in your home. This is a big problem with all types of construction contractors. They may have the proper licenses, but because of the high cost of insurance, they may not be properly insured and can end up on your homeowners policy if they get hurt.
It is important to locate the main water supply cut-off valve in your home. There should be a water meter either on it or possibly close by. Toilets, sinks and other fixtures could have their own valves that cut off. Make sure your entire family knows where each shut-off valve is, and provide instructions nearby on which direction to turn the valve in to shut it off.
As you have seen, doing your plumbing is not as scary as it may appear at first. Just think of all of the benefits it has and all of the expenses it can take care of, along with all of the money it can save you in the long run.